Measurements checked
We check clearances, access and fitting conditions before the drawings are signed off.
MMV Studio
Fitted wardrobes in Alicante
We can assist you inEspañolEnglishDeutschРусский
Survey, design, manufacture and fitting
We measure the opening at several points and plan its junctions with the walls, ceiling and floor.
Made for the actual room
Fitted means more than filling a recess
Depth, wall lean, ventilation, skirting and ceiling level change both the storage interior and the finished elevation. The proposal continues to prioritise straightforward upkeep, practical storage and finishes that remain calm in strong daylight.
Materials specified
The quote sets out boards, finishes, fittings and the installation scope.
A defined scope
Furniture and any separate building work are identified in the proposal.
A direct contact
Your project contact answers questions and coordinates the agreed stages.
Our process
From enquiry to installation
We move from an initial price guide to a quotation based on measured dimensions, then manufacture, fit and check the furniture with you.
Initial price guide
Send photos, rough dimensions, the address and a note about what the furniture must do. We can discuss a price range before measuring.
Survey of the space
At the property we check walls, services, clearances and the route for bringing the pieces in. These measurements replace the first estimates.
Design and plans, when needed
We develop the layout and project drawings if the job requires them. They are free when you order the manufacture of that project from us.
Final quotation
The agreed layout, boards, finishes, fittings and installation appear in a written quotation with the final price.
Approval and deposit
You can review the specification before accepting it. The agreed deposit then starts the manufacturing order.
Making the furniture
We prepare the pieces to the approved dimensions and check the details needed for delivery and fitting.
Fitting on site
The team installs the furniture and adjusts doors, drawers, joints and visible finishing details.
Checking it with you
We test how the furniture opens and works together, inspect the finish and record any final adjustment.
Your project starts here
Start with a photo, not a hundred decisions.
I'm Patricia Méndez. Send me a photo of your space and tell me what you would like to change. I'll help you think through the layout, storage and next steps.
No obligation. Rough measurements are enough to get started.
Interior decisions
The difficult part is what the recess does not reveal
Two recesses with the same width can require different construction. We measure geometry, available depth and junctions before promising capacity. In Alicante, it is tested against bright interiors, existing tiled floors, city access and homes used for part of the year.
Wall lean and squareness
We begin with one practical check: we take widths, heights and diagonals at several points in the opening. It produces a specific result: trims and allowances absorb irregularity without twisting the elevation.
Available depth
Sequence matters. First, we deduct the back, doors, tracks and walls that are out of plumb. The second condition: the nominal dimension becomes verified internal depth.
Access panels and ventilation
We locate grilles, boxes, valves and points that must remain accessible. One condition still applies: the wardrobe does not hide essential maintenance or create a damp enclosure.
Perimeter junctions
We coordinate ceiling, floor, sides, mouldings and skirting with the elevation. The decision is recorded. The final reference: the finished wardrobe reads as part of the bedroom.
From problem to drawing
Three recesses that need different construction
Integration follows the measured geometry and access route. An ideal module grid does not correct a real wall. The scenarios are adjusted for central apartments, family homes, penthouses and coastal properties.
Scenario 01 · Centro
Everyday storage without losing boxes at the back
The proposal becomes more coherent when we bring frequent items forward and reserve extra depth for reachable storage. The requirement remains unchanged: the recess volume is used without creating blind corners. The proposal must continue to prioritise straightforward upkeep, practical storage and finishes that remain calm in strong daylight.
- Starting point
- We verify depth at both sides and the bedroom door position rather than transferring a standard composition. On that basis, the project has a specific outcome: the layout knows its actual limit. In Alicante, this decision is also checked against bright interiors, existing tiled floors, city access and homes used for part of the year.
- Decision
- We begin with one practical check: we combine front hanging with shelves or luggage storage that do not require emptying the wardrobe. It produces a specific result: less frequent items remain retrievable.
- Before manufacture
- To settle this decision without improvising on site, we establish the back, ventilation and access to any existing service point. The result can then be checked: the enclosure does not compromise the wall or its maintenance.
Scenario 02 · Ensanche-Diputación
A fitted elevation where no wardrobe existed
The drawing records how we create modules and wall-to-wall trims without pretending the surrounding area is perfectly square. A later review leaves one clear criterion: the elevation remains regular even when the building is not. For a property around Benalúa, access and handling are reviewed before component sizes are fixed.
- Starting point
- This point is explained before pricing: we measure skirting, sockets, mouldings, ceiling and side junctions. The later check confirms the essential result: each interference enters the drawing.
- Decision
- We divide the wardrobe into buildable modules and proportion the trims as part of the drawing rather than at the end. The practical consequence: the tolerances do not look like added patches. The proposal must continue to prioritise straightforward upkeep, practical storage and finishes that remain calm in strong daylight.
- Before manufacture
- A nominal dimension is not enough here. We agree what remains, moves or sits outside the scope. After the review, the written price proposal and the work describe the same result.
Scenario 03 · Mercado
One calm elevation with two internal depths
Instead of assuming a standard answer, we assign uses and modules to the deeper and shallower zones. The intended result can be stated plainly: the pier no longer turns one end into wasted space. The approach is adapted to central apartments, family homes, penthouses and coastal properties, without turning location into a preset style.
- Starting point
- This is not about adding more modules. We survey the depth change and its relation to the doors. Usefulness is tested in one way: the opening does not clash with the transition.
- Decision
- Instead of assuming a standard answer, we place hanging and drawers in the full depth and shelves in the reduced zone. The intended result can be stated plainly: each interior receives a compatible use.
- Before manufacture
- We detail fixings, trim and adjustment allowance beside the pier once dimensions have been checked. The direct consequence: fitting maintains a continuous front line. The proposal must continue to prioritise straightforward upkeep, practical storage and finishes that remain calm in strong daylight.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Completed work
Examples of fitted wardrobes
Sixteen photographs from MMV projects in different Spanish cities. Tell us which detail you would adapt to your room in Alicante.
Wall-to-wall white frontsHandles beside a traditional balcony
Walnut with smoked glassPaired with full-depth closed storage
Built-in wardrobe beside the balconyFor an urban home
Illuminated niche overlooking the coastSit between full-height closed modules
Shallow storage for a corridorUses the available wall
Smoked glass with internal lightingDrawers through the glass
Storage bridge above the bedNiches form one fitted composition
Premium continuous walnutA complete bedroom storage wall
Natural oak fitted to the full recessIntegrate storage into the bedroom
Green lacquer with an open nicheWith a central oak bookcase
Fitted storage beneath a sloping roofPitch while retaining useful capacity
Designed around an existing columnIrregular wall without disguising it
Classic doors for an older propertyFinish complement the original floor
Integrated storage for a child's roomLow drawers for everyday use
Entrance wardrobe with a benchAn open oak seating niche
A home office concealed within storageIntegrated between closed wardrobe modules
Six configurations
Six types of recess and how the solution changes
The carcass, doors, trims and fitting order depend on the perimeter we actually find. The actual property in Alicante completes the choice.
| Configuration | Usually solves | Critical check |
|---|---|---|
| Bridge unit | Usually considered for: Side cabinets and overhead storage | Acceptance criterion: Fixing, headroom and weight |
| Existing recess | Frequent application: Interior and elevation between walls | Advance check: Diagonals, depth and ventilation |
| Full wall | Typical context: Modules from side to side | Must be recorded: Trims, skirting and side sockets |
| Floor to ceiling | Primary role: Daily storage plus top cupboards | A fact that changes the system: Transportable panels and lifting allowance |
| Under a slope | Need addressed: Stepped modules | The proposal must resolve: Usable height and each door swing |
| With a pier | Worth considering where there is: Different internal depths | Critical point: Transition and access to the shallow zone |
Written scope
What the fitted wardrobe project includes
The design proposal defines the interior and how it meets the walls, ceiling and floor.
Recess review
The drawing records how we collect photographs, intended use, initial dimensions and elements that must remain. A later review leaves one clear criterion: the first feasibility review starts with the complete perimeter.
Geometry survey
To settle this decision without improvising on site, we measure widths at different heights, diagonals, depths, wall lean and skirting. The result can then be checked: the component plan includes real tolerances. The actual property conditions in Alicante take priority over a catalogue solution.
Internal design
We adapt hanging, shelves, drawers and top storage to usable depth once dimensions have been checked. The direct consequence: external integration does not reduce internal function.
Doors and trims
We agree opening, profiles, handles, plinth, sides and ceiling line as part of the drawing rather than at the end. The practical consequence: all finishing details are approved with the elevation.
Manufacturing plan
With the recess verified, we fix tolerances, panel divisions, supports and installation sequence. Approval depends on one clear result: components respond to the recess and route in.
Fitting and adjustment
The solution is tested in two stages. First, we protect, assemble, finish and check doors and access. Then, the recess is completed and adjusted in the property.
Building work, damp repair, decoration or moving services are priced separately when the recess requires them. Any additional work identified in Alicante is added only after it has been explained and priced.
From drawing to fitting
The recess is verified before the order reaches the workshop is committed
One nominal dimension is not enough. Date and budget follow the geometry, interior, elevation, trims and access. In Alicante, we also confirm bright interiors, existing tiled floors, city access and homes used for part of the year.
How the order moves forward
- 01Photos and priorities
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
- 02Verified opening
The room itself, opening, access and door movement are checked before the working configuration and elevation are approved. For a property around San Blas–Santo Domingo, access and handling are reviewed before component sizes are fixed.
- 03Production slot
Drawings, finishes, hardware, commission detail and detailed quotation are accepted before production is booked.
- 04Fitting and review
Delivery, protection, installation, adjustment and final review are coordinated in Alicante.
Where the investment changes
Geometry sets the limit. Within it, we review wall lean, slopes, piers, depth changes and the number of trims. The answer must meet one condition: each irregularity is resolved before workshop production.
We establish carcasses, backs, divisions, drawers and accessories. The decision is recorded. The final reference: quoted capacity matches the approved layout.
We compare sliding, hinged, tall panels, mirror and hardware by considering use and geometry together. Acceptance is based on this result: weight and movement remain compatible with the opening.
With the recess verified, we include access, protection, agreed removal, fixings and adjustment. Approval depends on one clear result: installation does not depend on implied items. The approach is adapted to central apartments, family homes, penthouses and coastal properties, without turning location into a preset style.
Before the workshop · Alicante
Conditions worth recording in Alicante
Projects may involve central apartments, family homes, penthouses and coastal properties. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.
Babel and Centro: reading the property
For custom fitted wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.
Access and component sizes around Ensanche-Diputación
Bright interiors, existing tiled floors, city access and homes used for part of the year can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.
Everyday use from Mercado to Benalúa
The recommendation continues to prioritise straightforward upkeep, practical storage and finishes that remain calm in strong daylight. Materials and accessories are compared by care and usefulness, not by a presumed local style.
Documented confidence
What you can verify before approving the order
We publish how to contact us and when the team is available. Project-verified constraints in Alicante are recorded before workshop production.
Team availability
Published availability: Monday to Friday 09:00–13:00 and 14:00–20:00; Saturday 10:00–13:30 and 16:00–19:30.
Written guarantee
Applicable coverage, duration, supplied components, fitting, care and exclusions appear in the accepted documents.
Languages
We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Alicante office by appointment.
Who coordinates the order
A project manager reviews the enquiry, requests any missing details and follows the work from measurement to final installation.
Identity and contact
The enquiry is associated with mueblesamedidaalicante.es and proyectos@mueblesmedidavalencia.es. Controller details and terms of use appear in the legal notice.
The next step
Shall we look at your space?
Have a clearer idea now? Send me a photo of the space, what it needs to hold and your rough measurements. We'll identify what else is needed to prepare a proposal for your project.
Scope and terms are confirmed before you place an order.
Practical answers
Questions about custom fitted wardrobes in Alicante
Does the old interior need removing?＋
This depends on its condition and the new design. Removal, retention and alterations are identified in the scope before manufacture.
What do I need for an initial enquiry?＋
Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.
What is confirmed before manufacture?＋
The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
A fitted wardrobe planned around the recess
A recess can look square in a photo yet change width near the ceiling. We take dimensions on both sides and allow for scribed finishing pieces without sacrificing unnecessary storage.
Drawers are positioned around the actual door openings. We also check sockets, access panels and moisture signs before covering a wall.
Send rough dimensions and a photograph showing all edges of the recess. Final production measurements are taken at the property.