Measurements checked
We check clearances, access and fitting conditions before the drawings are signed off.
MMV Studio
Bespoke interior joinery in Alicante
We can assist you inEspañolEnglishDeutschРусский
Survey, design, manufacture and fitting
A panel, door or fitted unit changes with the wall and the trades around it.
Made for the actual room
Check the room before fixing the design
We look at the furniture in use: door swing, cleaning, capacity and the parts of the room that cannot move.
Materials specified
The quote sets out boards, finishes, fittings and the installation scope.
A defined scope
Furniture and any separate building work are identified in the proposal.
A direct contact
Your project contact answers questions and coordinates the agreed stages.
Our process
From enquiry to installation
We move from an initial price guide to a quotation based on measured dimensions, then manufacture, fit and check the furniture with you.
Initial price guide
Send photos, rough dimensions, the address and a note about what the furniture must do. We can discuss a price range before measuring.
Survey of the space
At the property we check walls, services, clearances and the route for bringing the pieces in. These measurements replace the first estimates.
Design and plans, when needed
We develop the layout and project drawings if the job requires them. They are free when you order the manufacture of that project from us.
Final quotation
The agreed layout, boards, finishes, fittings and installation appear in a written quotation with the final price.
Approval and deposit
You can review the specification before accepting it. The agreed deposit then starts the manufacturing order.
Making the furniture
We prepare the pieces to the approved dimensions and check the details needed for delivery and fitting.
Fitting on site
The team installs the furniture and adjusts doors, drawers, joints and visible finishing details.
Checking it with you
We test how the furniture opens and works together, inspect the finish and record any final adjustment.
Your project starts here
Start with a photo, not a hundred decisions.
I'm Patricia Méndez. Send me a photo of your space and tell me what you would like to change. I'll help you think through the layout, storage and next steps.
No obligation. Rough measurements are enough to get started.
Solutions for your space
What the design needs to resolve
The room and the way you use it guide these decisions.
Joinery and architecture
Doors, panelling, furniture and finishing pieces are coordinated with walls, floors and services. Each item is identified so junctions are resolved.
Measured at the junctions
Walls, floors, ceilings, reveals and skirting are recorded where the new work meets the building.
Movement is allowed for
Timber, floors and large panels need tolerances that respect changes in humidity and temperature.
Material and detail agree
The chosen board, veneer, timber or coating determines edge profiles, joints and suitable spans.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Completed work
Examples of bespoke interior joinery
Sixteen photographs from MMV projects in different Spanish cities. Tell us which detail you would adapt to your room in Alicante.
Oak living-room joineryRecess form one made-to-measure composition
Home office integrated into a storage wallThe workspace without loose furniture
Oak staircase with under-stair storageAre resolved as one system
Oak pocket sliding doorThe opening to the office
Slatted divider with a pivoting panelAreas and includes low storage
Curved walnut bar cabinetCounter follow the rounded wall
Folding timber and glass partitionLight from the living room
Restored window with shutters and benchDrawers without altering the façade
Walnut-clad island and tall unitsWith the worktop and architecture
Oak wardrobe and deskA desk within the bedroom
Walnut panelling with a concealed doorContinuous grain and shadow lines
Bookcase built around an archwayWithout obscuring the original opening
Timber doors for a traditional homeCorridor while respecting its character
Floating oak bathroom vanityA set for everyday use
Curved staircase with an oak handrailContinuous handrail demonstrate precise cabinetmaking
Dining bench with panelling and ventilationFor a compact dining area
Three ways to approach the specification
Where to focus the budget
We compare priorities before fixing the specification.
Everyday function01
Start with the essentials
Nominal dimensions are insufficient where a piece reaches the ceiling or meets several walls.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
If electrical, painting or masonry work is involved, each trade's scope is agreed before fitting.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
This helps set a realistic sequence and makes responsibility for each finish clear.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
Useful details for an initial assessment
Rough details are enough to start.
Photos of the space
Attach a plan or photos of the existing room.
Key dimensions
Measure uneven areas and junctions left in view.
Use and equipment
Mark services that cannot be covered.
Details for the quote
Separate workshop-made pieces from on-site fitting work.
From early guidance to a final figure
From enquiry to a confirmed proposal
01Initial review
We clarify use, scope and missing details.
02Proposal
Price and fitting after decisions are checked.
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
The chosen material sheet sets out performance and care.
Before deciding
Questions before you enquire
Can you work from construction drawings?＋
Yes, after reviewing dimensions, materials and responsibilities with the relevant professional. Production drawings are confirmed before manufacture.
What do I need for an initial enquiry?＋
Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.
What is confirmed before manufacture?＋
The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Joinery planned around the actual building
We inspect drawings and the existing space for uneven surfaces, services and visible junctions.
Substrate, edging, finish and fixings follow use and exposure.
The proposal separates workshop production from on-site adjustment.