Measurements checked
We check clearances, access and fitting conditions before the drawings are signed off.
MMV Studio
Sliding-door wardrobes in Alicante
We can assist you inEspañolEnglishDeutschРусский
Survey, design, manufacture and fitting
Sliding fronts free the floor in front of the wardrobe, while each leaf covers part of the interior.
Made for the actual room
The door saves floor space but changes access
Door width, overlap, tracks and internal divisions must align so drawers and pull-outs can open. The proposal continues to prioritise straightforward upkeep, practical storage and finishes that remain calm in strong daylight.
Materials specified
The quote sets out boards, finishes, fittings and the installation scope.
A defined scope
Furniture and any separate building work are identified in the proposal.
A direct contact
Your project contact answers questions and coordinates the agreed stages.
Our process
From enquiry to installation
We move from an initial price guide to a quotation based on measured dimensions, then manufacture, fit and check the furniture with you.
Initial price guide
Send photos, rough dimensions, the address and a note about what the furniture must do. We can discuss a price range before measuring.
Survey of the space
At the property we check walls, services, clearances and the route for bringing the pieces in. These measurements replace the first estimates.
Design and plans, when needed
We develop the layout and project drawings if the job requires them. They are free when you order the manufacture of that project from us.
Final quotation
The agreed layout, boards, finishes, fittings and installation appear in a written quotation with the final price.
Approval and deposit
You can review the specification before accepting it. The agreed deposit then starts the manufacturing order.
Making the furniture
We prepare the pieces to the approved dimensions and check the details needed for delivery and fitting.
Fitting on site
The team installs the furniture and adjusts doors, drawers, joints and visible finishing details.
Checking it with you
We test how the furniture opens and works together, inspect the finish and record any final adjustment.
Your project starts here
Start with a photo, not a hundred decisions.
I'm Patricia Méndez. Send me a photo of your space and tell me what you would like to change. I'll help you think through the layout, storage and next steps.
No obligation. Rough measurements are enough to get started.
Use before catalogue
Door movement organises the entire wardrobe
A continuous elevation can look very calm, provided it does not hide the module you need. We design the doors and interior as one mechanism. In Alicante, it is tested against bright interiors, existing tiled floors, city access and homes used for part of the year.
Calculated overlap
We define door width, number of leaves and overlap between profiles. One condition still applies: each useful opening aligns with the module it needs to serve.
Accessible drawers
A catalogue does not decide this point. We position drawers, baskets and pull-outs away from profiles and overlapped zones. The important result is simple: accessories open fully with a door in its intended position.
Stable tracks
We size profiles, rollers and support according to height, weight and finish once dimensions have been checked. The direct consequence: the doors move without vibration or unnecessary effort.
Maintainable hardware
We leave access for cleaning, adjustment and component replacement. The mechanism is not trapped behind irreversible finishing pieces.
Applied decisions
Three sliding elevations with different access patterns
Door count is not chosen for appearance alone. It changes how much interior is visible and which items can pull out. The scenarios are adjusted for central apartments, family homes, penthouses and coastal properties.
Scenario 01 · San Blas–Santo Domingo
A narrow bedroom with a simple opening
We divide the storage interior and elevation into two compatible zones. One door clears the everyday module completely. The actual property conditions in Alicante take priority over a catalogue solution.
- Starting point
- From the first proposal, we measure the distance to the bed, handles, curtains and entrance route. The expected outcome: the sliding system saves space where it is genuinely needed. The approach is adapted to central apartments, family homes, penthouses and coastal properties, without turning location into a preset style.
- Decision
- Geometry sets the limit. Within it, we align rails and shelves with the opening left by each door. The answer must meet one condition: no division remains trapped behind the central overlap.
- Before manufacture
- We verify floor level, panel height and the route for bringing it in. The decision is recorded. The final reference: the door can be installed and adjusted without distortion.
Scenario 02 · Carolinas Altas
More modules with a central composition
A catalogue does not decide this point. We coordinate three opening positions with drawers and internal equipment. The important result is simple: the elevation rhythm does not sacrifice useful access. For a property around Benalúa, access and handling are reviewed before component sizes are fixed.
- Starting point
- We identify the most frequently opened module and which contents need pull-out access. One condition still applies: the main zone receives the easiest opening.
- Decision
- We reserve the centre for a module compatible with the selected overlap before the drawing is closed. Once that decision is made, drawers and baskets do not clash with profiles. The approach is adapted to central apartments, family homes, penthouses and coastal properties, without turning location into a preset style.
- Before manufacture
- The decision starts with day-to-day use: we draw all three doors in their limit positions. The intended result is this: each use is tested with the elevation in motion.
Scenario 03 · Carolinas Bajas
Floor-to-ceiling doors without losing stability
The decision starts with day-to-day use: we balance weight, stiffness and visual division before choosing one continuous panel. The intended result is this: the desired height remains manageable and adjustable. In Alicante, this decision is also checked against bright interiors, existing tiled floors, city access and homes used for part of the year.
- Starting point
- First, we survey actual height, floor level and upper fitting allowance. After that, the door does not depend on an ideal dimension.
- Decision
- This is not about adding more modules. We select a structure, profile and finish compatible with the size. Usefulness is tested in one way: weight and deflection remain within a reliable solution.
- Before manufacture
- We confirm the lift, stairs, corridor and turn into the bedroom. One condition still applies: the intended format can reach its final position. In Alicante, this decision is also checked against bright interiors, existing tiled floors, city access and homes used for part of the year.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Completed work
Examples of sliding-door wardrobes
Sixteen photographs from MMV projects in different Spanish cities. Tell us which detail you would adapt to your room in Alicante.
Oak and woven-cane custom sliding wardrobeTexture to a bright bedroom
Smoked-glass sliding wardrobeSolution for a Mediterranean bedroom
White sliding wardrobe with oak interiorWithin a compact floor-to-ceiling installation
Natural-oak custom sliding wardrobeA calm full-wall storage scheme
Shallow custom sliding wardrobeBathroom without blocking it
Sliding wardrobe beside the bedSide passage is particularly narrow
Clay-lacquered sliding wardrobeA carefully planned birch interior
Adaptable custom sliding wardrobe for a teenagerAdjusted as daily needs change
Sage-green custom sliding-door wardrobeWithout crowding the desk area
Dark-walnut custom sliding wardrobeThe route towards the bathroom
Mirrored sliding wardrobe for a coastal bedroomLimited clearance around the bed
Sliding wardrobe fitted around a columnAlong one continuous level track
Premium bronze-glass sliding wardrobeAccessories in a master suite
Custom sliding hall wardrobeInterior behind three cream fronts
Walnut and glass sliding wardrobe for a suiteWarm lighting at sunset
Wardrobe concealed behind fluted sliding panelsReads as architectural wall cladding
Options with a reason
Door count, usable opening and the checks that matter
More doors reduce individual panel size but add profiles and overlap positions. The best option depends on the inside arrangement. The actual property in Alicante completes the choice.
| Configuration | Usually solves | Critical check |
|---|---|---|
| Integrated mirror | The option is assessed for: Bedroom needing reflection and openness | The survey must confirm: Weight, safety and cleaning |
| Mixed panel | The option is assessed for: Combination of lacquer, veneer or textile | The drawing identifies: Joints, thickness and stability |
| Full height | Frequent application: Continuous elevation to the ceiling | Critical point: Transport, stiffness and top allowance |
| Two wide doors | The option is assessed for: Short wardrobe or two internal zones | Acceptance criterion: Door weight and central overlap |
| Three doors | Worth considering where there is: Medium elevation with central module | Check before deciding: Drawer access in every position |
| Four doors | Worth considering where there is: Long wall or shared use | The survey must confirm: More joints and module alignment |
Written scope
What the sliding wardrobe project includes
The project connects the elevation, interior and mechanism. The track is not selected after the carcasses are made.
Elevation survey
The door format can be made and reach the surrounding area. That is why we log width, height, floor level, ceiling, sides and route in.
Opening map
From the first proposal, we draw each door closed and in its working positions. The expected outcome: the modules visible in each movement are known. For a property around La Florida, access and handling are reviewed before component sizes are fixed.
Coordinated interior
With the recess verified, we align divisions, drawers and accessories with usable openings. Approval depends on one clear result: no pull-out is blocked by a profile.
Track system
The decision starts with day-to-day use: we specify rollers, profiles, stops, supports and adjustment. The intended result is this: the mechanism matches door size and weight.
Panel and finish
We define substrate, thickness, mirror, lacquer, veneer or combination rather than transferring a standard composition. On that basis, the project has a specific outcome: the finish retains flatness and safety.
Fitting and testing
A nominal dimension is not enough here. We install, level, adjust, clean the tracks and test every opening. After the review, handover checks movement and interior together.
Wall reinforcement, floor correction, electrical work or removal of the previous elevation are listed separately when required. Any additional work identified in Alicante is added only after it has been explained and priced.
Before the workshop
Usable opening is approved before tracks are ordered
The budget depends on door count and size, mechanism, finish, interior and the difficulty of bringing panels to the space. In Alicante, we also confirm bright interiors, existing tiled floors, city access and homes used for part of the year.
Four milestones before handover
- 01Photos and priorities
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
- 02Verified opening
The space, opening, access and door movement are checked before the storage plan and elevation are approved. In Alicante, this decision is also checked against bright interiors, existing tiled floors, city access and homes used for part of the year.
- 03Production slot
Drawings, finishes, hardware, scope and written price proposal are accepted ahead of production is booked.
- 04Fitting and review
Delivery, protection, installation, adjustment and final review are coordinated in Alicante.
Where the investment changes
First, we review in parallel wider panels with three- or four-door compositions. After that, weight, joints and access are assessed together.
We begin with one practical check: we size tracks, rollers, stops and profiles for each door. It produces a specific result: the written price proposal identifies the system supporting the use.
We assess board, lacquer, veneer, mirror, glass and mixed materials once dimensions have been checked. The direct consequence: weight, preparation and handling are included.
Instead of assuming a standard answer, we include carcasses, accessories, levelling, access, fitting and adjustment. The intended result can be stated plainly: the door is not priced apart from the wardrobe it must serve. For a property around Carolinas Altas, access and handling are reviewed before component sizes are fixed.
Surveying the area · Alicante
What we check in homes across Alicante
Projects may involve central apartments, family homes, penthouses and coastal properties. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.
Benalúa and San Blas–Santo Domingo: reading the property
For custom sliding-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.
Access and component sizes around Carolinas Altas
Bright interiors, existing tiled floors, city access and homes used for part of the year can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.
Everyday use from Carolinas Bajas to Altozano–Conde Lumiares
The recommendation continues to prioritise straightforward upkeep, practical storage and finishes that remain calm in strong daylight. Materials and accessories are compared by care and usefulness, not by a presumed local style.
Documented confidence
No anonymous promises or implied scope
We publish how to contact us and when the team is available. Project-recorded particulars in Alicante are recorded before manufacture.
Website details
MMV Studio publishes proyectos@mueblesmedidavalencia.es and a link to the applicable legal information on mueblesamedidaalicante.es.
When the team is available
You can write Monday–Friday, 09:00–13:00 / 14:00–20:00, or Saturday, 10:00–13:30 / 16:00–19:30.
Guarantee terms
The accepted documents state what the guarantee covers, how long it applies, which parts are included and any care requirements or exclusions.
Languages
We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Alicante office by appointment.
Project contact
MMV Studio routes the request through a project manager who keeps the site survey, design, workshop and installation connected.
The next step
Shall we look at your space?
Have a clearer idea now? Send me a photo of the space, what it needs to hold and your rough measurements. We'll identify what else is needed to prepare a proposal for your project.
Scope and terms are confirmed before you place an order.
Before requesting a quotation
Questions about custom sliding-door wardrobes in Alicante
Can sliding doors reveal the whole interior?＋
Usually part remains covered by another leaf. The interior is planned so pull-out elements can be used.
What do I need for an initial enquiry?＋
Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.
What is confirmed before manufacture?＋
The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Sliding doors that still let drawers work
We place drawers where they can pull out with the doors in their actual open position. A drawer hidden behind overlapping leaves defeats the point of the layout.
Tracks and leaves take depth, so we measure what remains for hangers and clothing. Front length helps determine the number of access sections.
We compare track care, leaf weight and finishes. The quote names the mechanism and useful access width as well as the visible board.