Measurements checked
We check clearances, access and fitting conditions before the drawings are signed off.
MMV Studio
Custom bunk beds in Alicante
We can assist you inEspañolEnglishDeutschРусский
Survey, design, manufacture and fitting
Headroom above each mattress and a safe route at night matter as much as floor area saved.
Made for the actual room
Check the room before fixing the design
We look at the furniture in use: door swing, cleaning, capacity and the parts of the room that cannot move.
Materials specified
The quote sets out boards, finishes, fittings and the installation scope.
A defined scope
Furniture and any separate building work are identified in the proposal.
A direct contact
Your project contact answers questions and coordinates the agreed stages.
Our process
From enquiry to installation
We move from an initial price guide to a quotation based on measured dimensions, then manufacture, fit and check the furniture with you.
Initial price guide
Send photos, rough dimensions, the address and a note about what the furniture must do. We can discuss a price range before measuring.
Survey of the space
At the property we check walls, services, clearances and the route for bringing the pieces in. These measurements replace the first estimates.
Design and plans, when needed
We develop the layout and project drawings if the job requires them. They are free when you order the manufacture of that project from us.
Final quotation
The agreed layout, boards, finishes, fittings and installation appear in a written quotation with the final price.
Approval and deposit
You can review the specification before accepting it. The agreed deposit then starts the manufacturing order.
Making the furniture
We prepare the pieces to the approved dimensions and check the details needed for delivery and fitting.
Fitting on site
The team installs the furniture and adjusts doors, drawers, joints and visible finishing details.
Checking it with you
We test how the furniture opens and works together, inspect the finish and record any final adjustment.
Your project starts here
Start with a photo, not a hundred decisions.
I'm Patricia Méndez. Send me a photo of your space and tell me what you would like to change. I'll help you think through the layout, storage and next steps.
No obligation. Rough measurements are enough to get started.
Solutions for your space
What the design needs to resolve
The room and the way you use it guide these decisions.
Access and headroom
Ceiling height, mattresses, ladder and guarding must be resolved with a suitable system. The layout is also checked for making beds and cleaning.
Safer details
Rounded corners, stable fixings and reachable storage matter particularly in children’s and shared bedrooms.
The bed sets the geometry
Circulation, bedside access, sockets and reading lights are checked before surrounding furniture is dimensioned.
A layout that can adapt
Where needs may change, adjustable shelving and reconfigurable zones give the room a longer useful life.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Completed work
Examples of custom bunk beds
Sixteen photographs from MMV projects in different Spanish cities. Tell us which detail you would adapt to your room in Alicante.
Straight oak bunk bedDrawers beneath the beds
Bunk bed with a full-height wardrobeWardrobe beside the stair
Joinery fitted around a structural columnShelves within the recessed wall
Teenage bunk room with two desksA desk for each sleeper
Double oak-and-cane bunk wallOak and cane across two bunks
Easy-access lower bedWide steps to the upper bed
Bunk with a double bed belowDouble bed on the lower level
Bunks with private sleeping nichesA separate niche for each sleeper
L-shaped bunk with drawer stairsDrawers built into the steps
Bunk arrangement for three childrenThree beds with independent access
Bunk bed beneath a sloping roofStorage beneath the roof slope
Bunk bed with a guest trundlePullout bed below the bunks
Premium walnut bunk bedWalnut across the young person’s room
Train-style bunk with wardrobeWardrobe at the end of the bunk
Two beds and one study deskDesk away from the upper bed
Separating beech bunk bedBeds can be separated later
Three ways to approach the specification
Where to focus the budget
We compare priorities before fixing the specification.
Everyday function01
Start with the essentials
Each bed needs room to sit up and an entrance clear of other furniture.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
We also plan how sheets will be changed on the upper level.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Storage below is designed without blocking access to the bed.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
Useful details for an initial assessment
Rough details are enough to start.
Photos of the space
Photograph the ceiling, windows and supporting wall.
Key dimensions
Measure headroom above each mattress.
Use and equipment
Give ages, mattress models and access side.
Details for the quote
Mark switches and furniture beside the ladder.
From early guidance to a final figure
From enquiry to a confirmed proposal
01Initial review
We clarify use, scope and missing details.
02Proposal
Price and fitting after decisions are checked.
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
The chosen material sheet sets out performance and care.
Before deciding
Questions before you enquire
Can the space underneath be used?＋
This depends on the system, structure and use requirements. Added drawers or units are checked so they do not compromise access or stability.
What do I need for an initial enquiry?＋
Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.
What is confirmed before manufacture?＋
The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Bunk beds: ceiling height and everyday access
We check mattress heights, windows and the ladder position.
Guardrails, structure and fixings follow the configuration and the users' ages.
The proposal names compatible mattresses, accessories and fitting.