MMV Studio

Bespoke shelving in Alicante

We can assist you inEspañolEnglishDeutschРусский

Survey, design, manufacture and fitting

A long thin shelf may look fine when empty and bow once loaded with books. We start with its contents, their likely weight and the distance between supports.

Describe my project → Request a quote WhatsApp

Ask us about your address in AlicanteHomes and professional spaces

Made for the actual room

Check the room before fixing the design

We look at the furniture in use: door swing, cleaning, capacity and the parts of the room that cannot move.

Measurements checked

We check clearances, access and fitting conditions before the drawings are signed off.

Materials specified

The quote sets out boards, finishes, fittings and the installation scope.

A defined scope

Furniture and any separate building work are identified in the proposal.

A direct contact

Your project contact answers questions and coordinates the agreed stages.

Our process

From enquiry to installation

We move from an initial price guide to a quotation based on measured dimensions, then manufacture, fit and check the furniture with you.

Initial price guide
Send photos, rough dimensions, the address and a note about what the furniture must do. We can discuss a price range before measuring.
Survey of the space
At the property we check walls, services, clearances and the route for bringing the pieces in. These measurements replace the first estimates.
Design and plans, when needed
We develop the layout and project drawings if the job requires them. They are free when you order the manufacture of that project from us.
Final quotation
The agreed layout, boards, finishes, fittings and installation appear in a written quotation with the final price.
Approval and deposit
You can review the specification before accepting it. The agreed deposit then starts the manufacturing order.
Making the furniture
We prepare the pieces to the approved dimensions and check the details needed for delivery and fitting.
Fitting on site
The team installs the furniture and adjusts doors, drawers, joints and visible finishing details.
Checking it with you
We test how the furniture opens and works together, inspect the finish and record any final adjustment.

Patricia MéndezYour contact in Alicante

Your project starts here

Start with a photo, not a hundred decisions.

I'm Patricia Méndez. Send me a photo of your space and tell me what you would like to change. I'll help you think through the layout, storage and next steps.

No obligation. Rough measurements are enough to get started.

Share my idea Chat on WhatsApp

Solutions for your space

Load first, composition second

One wall can combine open shelves, low drawers and sections carrying different weights.

Span between supports

Heavy books may require a shorter span or concealed reinforcement.

Heights for the collection

Files, records, books and tall objects rarely suit identical compartments.

Closed sections

Low drawers or doors hide smaller belongings without closing the whole wall.

Fit with the room

Radiators, skirting and windows are included in the drawing so access remains.

Instagram

A closer look at our studio

Examples of bespoke shelving

Sixteen photographs from MMV projects in different Spanish cities. Tell us which detail you would adapt to your room in Alicante.

Bespoke shelving in Alicante: wall-to-wall oak bookcase — 01
**Wall-to-wall oak bookcase**Support spacing changes if every section will carry heavy books.

Bespoke shelving in Alicante: walnut shelves fitted inside a niche — 02
**Walnut shelves fitted inside a niche**A shallow niche suits some objects but not every book format.

Bespoke shelving in Alicante: white shelving wrapped around a doorway — 03
**White shelving wrapped around a doorway**Shelving around a door must respect its frame and full opening.

Bespoke shelving in Alicante: premium smoked-oak library — 04
**Premium smoked-oak library**Smoked oak is chosen with the thickness and reinforcement set for each span.

Bespoke shelving in Alicante: low shelving beneath a picture window — 05
**Low shelving beneath a picture window**Beneath a window, unit height must leave the sash and blind usable.

Bespoke shelving in Alicante: olive-green bookcases beside the fireplace — 06
**Olive-green bookcases beside the fireplace**By a fireplace, local clearances and conditions are checked before shelves are fixed.

Bespoke shelving in Alicante: curved shelving used as a room divider — 07
**Curved shelving used as a room divider**A curve may divide rooms; stability and passage on both sides matter.

Bespoke shelving in Alicante: stepped shelving beneath the staircase — 08
**Stepped shelving beneath the staircase**Each step reduces height, so objects belong where they can be taken out.

Bespoke shelving in Alicante: black-steel and oak shelving — 09
**Black-steel and oak shelving**Steel and oak need different supports; their junctions are detailed before production.

Bespoke shelving in Alicante: blue children's shelving with low drawers — 10
**Blue children's shelving with low drawers**Low drawers bring children’s belongings close without making high shelves a climbing aid.

Bespoke shelving in Alicante: bookcase fitted around a structural column — 11
**Bookcase fitted around a structural column**The column becomes part of the layout; load is not left to an improvised span.

Bespoke shelving in Alicante: shelving for an attic room — 12
**Shelving for an attic room**A sloping ceiling calls for heights measured along the entire bookcase.

Bespoke shelving in Alicante: coastal bookcase with natural cane — 13
**Coastal bookcase with natural cane**Openwork hides some contents but does not replace the shelf-load calculation.

Bespoke shelving in Alicante: walnut and travertine display shelving — 14
**Walnut and travertine display shelving**Travertine adds weight; display pieces and book-bearing sections have different roles.

Bespoke shelving in Alicante: oak and terracotta retail display — 15
**Oak and terracotta retail display**In retail display, eye level and customer access guide the arrangement.

Bespoke shelving in Alicante: accessible bookcase with curved ends — 16
**Accessible bookcase with curved ends**Curved ends belong where a square corner would intrude into circulation.

Three ways to approach the specification

Shelving you can actually use

Support, depth and fixing change with the contents.

Books01

Manage weight and deflection

Each shelf length follows the planned load and material choice.

Spans assessed
Thickness or reinforcement specified
Depth suited to real books

Mixed collection02

Vary openings without losing order

Tall pieces and boxes get distinct spaces; items not for display can go behind doors.

Indicative inventory
Different clear heights
Doors where they help

Floor to ceiling03

Plan production and fitting

The unit is divided so it can enter the home and allow for ceiling variation.

Access to property checked
Finishing pieces planned
Wall fixing specified

A detailed quotation

Useful details for an initial assessment

Rough details are enough to start.

Photos of the space

Show the full wall and ceiling.

Key dimensions

Measure the tallest and heaviest books or objects.

Use and equipment

Say which sections should have doors.

Details for the quote

Mark cables, access panels and obstacles to fixing.

From early guidance to a final figure

From enquiry to a confirmed proposal

01Initial review

We clarify use, scope and missing details.

02Proposal

Price and fitting after decisions are checked.

Send what you have; we will identify the next detail.

Send photographs and dimensions → Send via WhatsApp

Illustrative material detail for bespoke shelving

Materials and details

Choose the specification as a whole

A surface, its supporting board, edges and hardware need to work together.

SubstrateThickness and intended load.

SurfaceColour, feel and cleaning.

MechanismsOpening and frequency of use.

FinishingEdges, fixings and service access.

The chosen material sheet sets out performance and care.

Before deciding

Questions before you enquire

Can the shelves be moved later?＋

Some can where adjustable positions are built in and the loads allow. Heavy or structural sections need settling during design.

Does it need to be fixed to the wall?＋

That depends on height, depth and load. We review the support and plan fixings for the actual design, especially for tall shelving.

What helps with an initial quote?＋

Photos of the wall, rough dimensions and examples of the books or objects. That helps us assess shelves, supports and finishes before the final survey.

Your project starts here

Send the details you have

We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.

01 Initial reply and feasibility review
02 Suggested next step
03 A detailed quotation antes de fabricar

Name * Phone / WhatsApp * Email Project type * Indicative budget Preferred contact language * Approximate dimensions and what you need Add photographs or a plan JPG, PNG, WEBP, HEIC or PDF · up to 8 files · 40 MB per file · 120 MB total

Ask on WhatsApp

First enquiry without obligation.

Shelving made for particular books and objects

Before dividing shelving into equal boxes, we look at examples of what will go inside. Large books need depth; tall objects need enough room to lift them out; rows of heavy books need suitable supports. Span, material and thickness are decided together to avoid shelves bowing in use.

The wall shapes the work too. For floor-to-ceiling shelving we check uneven surfaces and divide the installation into pieces that can enter the home. If it hangs from the wall, we examine the supporting material before choosing fixings. Windows, radiators and sockets appear on the drawing so they remain usable.

Send photos of the wall and a rough list of books, boxes and display pieces. We can then propose depths, open sections and closed storage. The quote sets out structure, backs, finishing pieces and fixings, along with the visible finish you choose.